CALMAX
  • Colour Code    
  White / Violet
  • Typical Analysis
C
  0,60
       Mn     
  0,8
       Cr      
  4,5  
           Mo         
  0,5 
        V        
  0,2
         Si        
  0,35
        Others
  --
  • Hardness Supplied approx.HB
   200
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   1.2358
       JIS (Japan) 
   --
  • Characteristics  
   A very versatile high alloyed steel with good wear resistance & high   toughness.
  • Soft Anneal ºC
  860
  • Hardening Temp.ºC
   950-970
  • Quenching 
 Vacuum, air, oil and gas
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  59
250
  58
400
  54
500
  53
550

  50
600
  43
  • Application
 General blanking & forming, deepdrawing, coining & cold extrusion dies.
                              
CARMO
  • Colour Code    
  Red / Voilet
  • Typical Analysis
C
  0,60
       Mn     
  0,8
       Cr      
  4,5
           Mo         
  0,5
        V        
  0,2
         Si        
  0,35
        Others
  --
  • Hardness Supplied approx.HB
   250
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   1.2358
       JIS (Japan) 
   --
  • Characteristics  
 A prehardened steel especially suitable for car body dies. 
  • Soft Anneal ºC
  860
  • Hardening Temp.ºC
   950-970
  • Quenching 
   Oil, Vacuum, air
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  59
250
  58
400
  57
500
  53
550

  50
600
  43
  • Application
   --

CALDIE
  • Colour Code    
 White / Grey
  • Typical Analysis
C
  0,7
       Mn     
  0,5
       Cr      
  5,0
           Mo         
  2,3
        V        
  0,5
         Si        
  0,2
        Others
  --
  • Hardness Supplied approx.HB
   215
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   --
       JIS (Japan) 
   --
  • Characteristics  
A Cr-Mo-V alloyed tool steel with very good chipping , cracking and wear resistance.
  • Soft Anneal ºC
  820
  • Hardening Temp.ºC
  850-900
  • Quenching 
 Vacuum and air
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  59
250
  58
400
  57
500
  53
550

  50
600
  43
  • Application
  •  Blanking applications where high ductility and toughness are needed to prevent chipping/cracking.
  • Cold forging and forming operations.
  • Machine knives.
  • Thread rolling dies.
  • Substrate for surface coatings.

SVERKER 21 (HCHCr)

  • Colour Code    
  Yellow / White
  • Typical Analysis
C
  1,55
       Mn     
  0,4
       Cr      
  11,8
           Mo         
  0,8
        V        
  0,8
         Si        
  0,3
        Others
 --
  • Hardness Supplied approx.HB
   210
  • Standards
       AISI (USA)     D2
       W.nr (Germany) 
   1.2379
       JIS (Japan) 
   SKD 11
  • Characteristics  
 High performance tool steel with high wear resistance & toughness.
  • Soft Anneal ºC
  850
  • Hardening Temp.ºC
   990-1050
  • Quenching 
   Vacuum and air
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  63
250
  59
400
  59
500
  60
550

  54
600
  48
  • Application
 Tools for blanking, punch and die & trimming. Also for bending, deep   drawing & coining.

SVERKER 3 (HCHCr)

  • Colour Code    
  Red
  • Typical Analysis
C
  2,05
       Mn     
  0,8
       Cr      
  12,7
           Mo         
  --
        V        
  --
         Si        
  0,3
        Others
  W 1.1
  • Hardness Supplied approx.HB
   240
  • Standards
       AISI (USA)     D6
       W.nr (Germany) 
   1.2436
       JIS (Japan) 
   SKD 2
  • Characteristics  
 High performance tool steel with high wear resistance & toughness.
  • Soft Anneal ºC
  850
  • Hardening Temp.ºC
   920-1000
  • Quenching 
  Vacuum and air
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  64
250
  61
400
  60
500
  59
550

  56
600
  48
  • Application 

Tool for blanking, punching of thin section. Also for deep drawing,   bending & coining.

SLEIPNER

  • Colour Code    
  Blue/Brown
  • Typical Analysis
C
  0.9
       Mn     
  0.5
       Cr      
  7.8
           Mo         
  2.5
        V        
  0.5
         Si        
  0.9
        Others
  --
  • Hardness Supplied approx.HB
   235
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   --
       JIS (Japan) 
   --
  • Characteristics  
 A Cr-Mo-V alloyed tool steel with good chipping resistance & high   compressive strength.
  • Soft Anneal ºC
  850
  • Hardening Temp.ºC
   950-1080
  • Quenching 
  Vacuum , oil and gas
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  60
 300
  59
 560
  60
 600
  48
  • Application
Sleipner is recommended for medium run tooling applications where a resistance to mixed or abrasive wear and a good resistance to chipping are required.
Examples:Blanking and fine blanking,Shearing,Forming,Coining,Cold forging,Cold extrusion,Thread rolling,Drawing and deep drawing,Powder pressing.

VANADIS 4
  • Colour Code    
  Green/White
  • Typical Analysis
C
  1,50
       Mn     
  0,4
       Cr      
  8,0
           Mo         
  1,5
        V        
  4,0
         Si        
  1,0
        Others
  --
  • Hardness Supplied approx.HB
   230
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   --
       JIS (Japan) 
   --
  • Characteristics  
A Cold work tool steel producedby powder metallurgy process.Superiorcombination of toughness & wear resistance.  
  • Soft Anneal ºC
  900 
  • Hardening Temp.ºC
   980-1100
  • Quenching 
  Vacuum.
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  60
250
  58
400
  60
500
  61
550

  55
600
  47
  • Application 

Blanking, deep drawing & forming of Ms, Cu, Al & Austenitic SS.

VANADIS 10
  • Colour Code    
  Green/ Violet
  • Typical Analysis
C
  2,9
       Mn     
  0,5
       Cr      
  8,0
           Mo         
   1,5
        V        
  9,8
         Si        
  1,0
        Others
  --
  • Hardness Supplied approx.HB
   275
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   --
       JIS (Japan) 
   --
  • Characteristics  
  A Cold work tool steel produced by powder metallurgy process characterized   by extremely good abrasive wear resistance & high toughness.
  • Soft Anneal ºC
  900
  • Hardening Temp.ºC
   980-1100
  • Quenching 
 Vacuum.
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  63
250
  62
400
  61
500
  65
550

  60
600
  52
  • Application 

Blanking, deep drawing & forming of Ms, Cu, Al & Austenitic SS.

VANADIS 6
  • Colour Code    
  Green/Dark Green
  • Typical Analysis
C
  2,1
       Mn     
  0,4
       Cr      
  6,8
           Mo         
  1,5
        V        
  5,4
         Si        
  1,0
        Others
  --
  • Hardness Supplied approx.HB
   230
  • Standards
       AISI (USA)     --
       W.nr (Germany) 
   --
       JIS (Japan) 
   --
  • Characteristics  
A Cold work tool steel producedby powder metallurgy process.Superiorcombination of toughness & wear resistance.  
  • Soft Anneal ºC
  900 
  • Hardening Temp.ºC
   900-950
  • Quenching 
  Vacuum.
Tempering temperature ºC 2x2 hrs
Hardness achieved ( HRC )
200
  60
250
  58
400
  60
500
  61
550

  55
600
  47
  • Application 

Blanking, forming of Ms, Cu, Al & Austenitic SS,Knives